CCFBG
http://www.ccfbg.com/forum/

attn: efh, bastard engine guys
http://www.ccfbg.com/forum/viewtopic.php?f=1&t=11425
Page 1 of 1

Author:  Daz [ Fri Aug 13, 2010 10:06 pm ]
Post subject:  attn: efh, bastard engine guys

Is this a good deal?

http://buffalo.craigslist.org/pts/1896330046.html

The slugs will have to be changed though for a more street friendly 12:1 :D and heads will be more street friendly around 320 cc intake runners(119 comb chambers if it makes a diff.)

It might be too much bottom but its easy enough to use the bottle to make it worth it..

whaddya think?

Author:  nascar tata [ Sat Aug 14, 2010 1:02 pm ]
Post subject: 

Those heads for $2,800 might be worth it, depending on how much work and who did the work on them. My B1's cost me a whole bunch more than that.

Author:  Daz [ Sat Aug 14, 2010 1:53 pm ]
Post subject: 

the heads are too big..

Author:  Mr Bastard [ Sat Aug 14, 2010 10:27 pm ]
Post subject: 

your not going to get a big block to run happy on todays gas at 12:1
i wouldn't go much over 10 really on todays pump gas on one, small blocks you can get away with more with the better chambers of the heads. the block is at its final bore so if there is a mark in the cyls it would need to be sleeved, its a so so deal but your getting used block at its max bore, used rods that likely need new rod bolts and gone over, a set of pistons you can't use but might be able to sell for a bit. a dominator intake and carb that isnt real great on the street.

Author:  Daz [ Sun Aug 15, 2010 5:48 am ]
Post subject: 

thanks

Author:  efh [ Sun Aug 15, 2010 10:49 am ]
Post subject: 

Mr Bastard wrote:
your not going to get a big block to run happy on todays gas at 12:1
i wouldn't go much over 10 really on todays pump gas on one, small blocks you can get away with more with the better chambers of the heads. the block is at its final bore so if there is a mark in the cyls it would need to be sleeved, its a so so deal but your getting used block at its max bore, used rods that likely need new rod bolts and gone over, a set of pistons you can't use but might be able to sell for a bit. a dominator intake and carb that isnt real great on the street.


What he said , this is what happens when you take part of a weekend off ,you miss everything :wink:

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/