CCFBG http://www.ccfbg.com/forum/ |
|
Stock cams for 1982 to 1992 F-Body's http://www.ccfbg.com/forum/viewtopic.php?f=13&t=1178 |
Page 1 of 1 |
Author: | Hawk [ Thu Mar 02, 2006 9:44 am ] |
Post subject: | Stock cams for 1982 to 1992 F-Body's |
Stock 305 TPI cams for 1985 to 1992. **Note the 350 TPI uses the 305 Manual Trany cams. 1985 Flat Tappet #14088843 Int/Exh 202/206 Lift .403/.415 1986 Flat Tappet #14094097 Int/Exh 178/194 Lift .350/.385 1987 Roller #14093643 Manual Trany Int/Exh 202/207 Lift .404/.415 1987 Roller #14093640 LM1 Police Pack Int/Exh 191/202 Lift .383/.404 1987-92 Roller #10088155 Auto Trany Int/Exh 179/194 Lift .350/.384 1988-89 Roller #10066049 Manual Trany Int/Exh 207/213 Lift .415/.430 1990-92 Roller #10111773 Manual Trany Int/Exh 202/207 Lift .413/.428 _________________ Carburated V8 Engines cams---- LG4 Tappet #14014475 Int/Exh 177/194 Lift .357/.390 LG4 #1406053 Int/Exh 177/194 Lift .350/.385 LG4/L03 #14088841 Int/Exh 177/194 Lift .350/.385 The first cam listed is the Flat tappet that started in the 1982 Z28. In spite of the fact that these last 2 cams have identical specs, the #14088841 cam is physicaly different because its lobes are wider. ___________________ V6 cams ---------- All camaro 2.8 and 3.1 V6's are equiped with the same cam. Sold as part #14031378. Int/Exh 196/202 Lift .394/.410 |
Author: | Daz [ Sat Dec 02, 2006 1:34 pm ] |
Post subject: | |
What are the lobe separation on these cams?Any idea? |
Author: | Hawk [ Wed Dec 20, 2006 9:25 pm ] |
Post subject: | |
I found them, just havnt had time to put them up. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |