Author |
Message |
Daz
CCFBG Club Member
Joined: Sat Mar 19, 2005 8:15 am Posts: 3233 Location: Mississauga
|
Starter removal
It has BBK headers and a single cat(NA5)
|
Thu Jun 16, 2011 4:36 pm |
|
|
juice
Forum Moderator
Joined: Fri Mar 18, 2005 12:04 am Posts: 2855 Location: you know
|
Re: Starter removal
unbolt the starter pull it to the front of the car to slip out of place, then slide it along the exhaust to the rear of the car and find a spot to pull it out from there, thats how i do it with my duals. iirc http://rides.webshots.com/photo/1137334 ... 2918zvkldx
_________________1995 Trans AM
|
Thu Jun 16, 2011 4:47 pm |
|
|
Vetty
Operations Team
Joined: Tue May 03, 2005 5:27 pm Posts: 3072 Location: Oshawa
|
Re: Starter removal
Doing it on a A4 is alot harder then a M6. I did the same as juice and dropped mine down on the exhaust and moved it back along the y pipe and wiggle it out.
_________________ 1969 Firebird Sprint OHC 6 - 250ci/M5 1995 Trans Am - Blue Green Chameleon - 350ci/A4 1994 Fire-Am - Polo Green - 355ci/M6 380rwhp: SOLD
|
Thu Jun 16, 2011 4:59 pm |
|
|
juice
Forum Moderator
Joined: Fri Mar 18, 2005 12:04 am Posts: 2855 Location: you know
|
Re: Starter removal
didnt ralize it was an auto
_________________1995 Trans AM
|
Thu Jun 16, 2011 7:07 pm |
|
|
Mr Bastard
CCFBG Club Member
Joined: Sat Mar 19, 2005 8:07 pm Posts: 4327 Location: The big town
|
Re: Starter removal
holy shit....it really did let me pick all 3
_________________9.06@155 mph, small block pump gas with 3.42's bird 8.14@166 mph, big block on 250 shot monza
|
Thu Jun 16, 2011 10:29 pm |
|
|
Z28 MeTaL HeAd
CCFBG Club Member
Joined: Tue Feb 28, 2006 1:42 pm Posts: 2739 Location: Mississauga
|
Re: Starter removal
i did it on a buddies 94 A4 from the front..it wasnt as bad as it looks, just took a little wiggle magic
_________________2012 Camaro 2SS/RS - LS3/TR6060: BTR Cam, Long Tubes, 3" Catback, UDP, CAI Intake, Air Scoop, 3.91 Gears, Poly Diff Bushings, Toe Arms, Poly Subframe, Poly Radius-Rod bushings, ZL1 Suede Shifter, ZL1 Mounts, Arun Tuned - 475rwhp 443rwtq 11.97 @ 116 w/ 1.85 60'Listen To Song Of My People!
|
Thu Jun 16, 2011 11:32 pm |
|
|
Mr Bastard
CCFBG Club Member
Joined: Sat Mar 19, 2005 8:07 pm Posts: 4327 Location: The big town
|
Re: Starter removal
Z28 MeTaL HeAd wrote: i did it on a buddies 94 A4 from the front..it wasnt as bad as it looks, just took a little wiggle magic depends on brand of headers and y pipe combo. some are easier then others.
_________________9.06@155 mph, small block pump gas with 3.42's bird 8.14@166 mph, big block on 250 shot monza
|
Sun Jun 19, 2011 5:59 pm |
|
|
Daz
CCFBG Club Member
Joined: Sat Mar 19, 2005 8:15 am Posts: 3233 Location: Mississauga
|
Re: Starter removal
eh I put it aside
Im not getting 12 volts at the solenoid
|
Sun Jun 19, 2011 7:29 pm |
|
|
Mr Bastard
CCFBG Club Member
Joined: Sat Mar 19, 2005 8:07 pm Posts: 4327 Location: The big town
|
Re: Starter removal
Daz wrote: eh I put it aside
Im not getting 12 volts at the solenoid hotwire
_________________9.06@155 mph, small block pump gas with 3.42's bird 8.14@166 mph, big block on 250 shot monza
|
Mon Jun 20, 2011 11:06 pm |
|
|
Daz
CCFBG Club Member
Joined: Sat Mar 19, 2005 8:15 am Posts: 3233 Location: Mississauga
|
Re: Starter removal
yes sir..
Using a Ford solenoid..I wouldve gotten the LS1 solenoid but theyre still developing it..lol
|
Tue Jun 21, 2011 8:24 am |
|
|
|