| CCFBG http://www.ccfbg.com/forum/ |
|
| 35mm Swaybar Endlinks - Reg or Poly? http://www.ccfbg.com/forum/viewtopic.php?f=13&t=13472 |
Page 1 of 1 |
| Author: | Vetty [ Mon Mar 12, 2012 9:32 am ] |
| Post subject: | 35mm Swaybar Endlinks - Reg or Poly? |
On a stiffer bar should i only use poly bushings or would reg be fine? |
|
| Author: | Daz [ Mon Mar 12, 2012 12:26 pm ] |
| Post subject: | Re: 35mm Swaybar Endlinks - Reg or Poly? |
poly It wont be any stiffer than a smaller sway bar if the softer endlinks are giving in. Blue moog polys IMO. |
|
| Author: | userchemical [ Mon Mar 12, 2012 1:30 pm ] |
| Post subject: | Re: 35mm Swaybar Endlinks - Reg or Poly? |
Daz wrote: poly It wont be any stiffer than a smaller sway bar if the softer endlinks are giving in. Blue moog polys IMO. Poly its the same price. |
|
| Author: | The Project [ Mon Mar 12, 2012 8:30 pm ] |
| Post subject: | Re: 35mm Swaybar Endlinks - Reg or Poly? |
Daz wrote: poly It wont be any stiffer than a smaller sway bar if the softer endlinks are giving in. Blue moog polys IMO. Yup. I got my polys from TDS. 
|
|
| Author: | Z28 MeTaL HeAd [ Thu Mar 15, 2012 8:28 am ] |
| Post subject: | Re: 35mm Swaybar Endlinks - Reg or Poly? |
Poly no doubt. If you want to get them locally, performance improvements can order you in (if its not already in stock) Energy Suspension poly links. |
|
| Author: | Vetty [ Thu Mar 15, 2012 8:13 pm ] |
| Post subject: | Re: 35mm Swaybar Endlinks - Reg or Poly? |
Reason why i was asking if i needed poly was at first i couldnt find that Energy Suspension carried a 35mm bushing and figured id have to go BMR for the bushings and it would cost a stupid amount to get them here. Now that i just found out they do carry the right bushing i can order locally and shouldnt cost to much for them and the endlinks both in poly. Thanks! |
|
| Author: | ktuga [ Thu Mar 15, 2012 9:46 pm ] |
| Post subject: | Re: 35mm Swaybar Endlinks - Reg or Poly? |
check suspension techniques. i know their sway bar kit for f-bodies includes a front 35mm |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|