| View unanswered posts | View active topics |
It is currently Sat Apr 20, 2024 3:32 am |
|
All times are UTC - 5 hours [ DST ] |
|
Page 1 of 1 |
[ 6 posts ] |
| Print view | Previous topic | Next topic |
4th Gen Rear Discs On A 3rd Gen Rear End.
| Author | Message |
|---|---|
|
Senior Forum User
Joined: Tue Nov 25, 2008 5:05 am Posts: 596 Location: North York, Ontario 
|
  4th Gen Rear Discs On A 3rd Gen Rear End.The 3rd Gen Rear End Is A Disc Brake Rear End Without The Brackets Or Anything, Now I Was Thinkinh About Taking The Rear Discs From The 95 With All The Brackets And Everything And Putting It On My 3rd Gen Disc Rear End...Will It Bolt Right Up? Any Mods I Should Be Aware Of? Or Do I Need A 3rd Gen Rear Disc Brake Brackets...
Thanks, Reredrum _________________ PREVIOUS F-BODIES: -'91 FIREBIRD:LO3:700R4:0HP:1500TQ -'86 Z28:383:T56:420HP:471TQ -'88 Z28:ZZ4Crate:T5:344HP:390TQ |
| Thu Jan 01, 2009 6:05 pm |
|
|
|
|
Senior Forum User
Joined: Fri Apr 13, 2007 1:04 am Posts: 1116 Location: Mississauga, Ontario
|
Re: 4th Gen Rear Discs On A 3rd Gen Rear End. Reredrum wrote: The 3rd Gen Rear End Is A Disc Brake Rear End Without The Brackets Or Anything, Now I Was Thinkinh About Taking The Rear Discs From The 95 With All The Brackets And Everything And Putting It On My 3rd Gen Disc Rear End...Will It Bolt Right Up? Any Mods I Should Be Aware Of? Or Do I Need A 3rd Gen Rear Disc Brake Brackets... Thanks, Reredrum why not just swap the 4th gen rear end into the 3rd gen. Much easier as it is a bolt in, and the disc brakes are already on it. _________________ 1999 Cavalier Z24 Clone 2.2 5MT 1995 Camaro Z28 | SOLD |
| Thu Jan 01, 2009 6:49 pm |
|
|
|
|
Senior Forum User
Joined: Tue Nov 25, 2008 5:05 am Posts: 596 Location: North York, Ontario
|
Ive Got 342s In The 3rd Gen...And The 4th Gen Is 273s I Believe...Not an Option...
 _________________ PREVIOUS F-BODIES: -'91 FIREBIRD:LO3:700R4:0HP:1500TQ -'86 Z28:383:T56:420HP:471TQ -'88 Z28:ZZ4Crate:T5:344HP:390TQ |
| Thu Jan 01, 2009 7:07 pm |
|
|
|
|
Senior Forum User
Joined: Fri Apr 13, 2007 1:04 am Posts: 1116 Location: Mississauga, Ontario
|
Reredrum wrote: Ive Got 342s In The 3rd Gen...And The 4th Gen Is 273s I Believe...Not an Option... swap them? _________________ 1999 Cavalier Z24 Clone 2.2 5MT 1995 Camaro Z28 | SOLD |
| Thu Jan 01, 2009 7:14 pm |
|
|
|
|
Senior Forum User
Joined: Tue Nov 25, 2008 5:05 am Posts: 596 Location: North York, Ontario
|
Easier to Swap The Brakes...
_________________ PREVIOUS F-BODIES: -'91 FIREBIRD:LO3:700R4:0HP:1500TQ -'86 Z28:383:T56:420HP:471TQ -'88 Z28:ZZ4Crate:T5:344HP:390TQ Last edited by Reredrum on Thu Jan 01, 2009 9:37 pm, edited 1 time in total. |
| Thu Jan 01, 2009 8:24 pm |
|
|
|
|
CCFBG Club Member  Joined: Tue Feb 28, 2006 1:42 pm Posts: 2739 Location: Mississauga
|
Reredrum wrote: Easier to Swap The Breaks... As long as both rear ends are disc, the 4th gen backing playes should bolt directly onto the 3rd gen rear. _________________ 2012 Camaro 2SS/RS - LS3/TR6060: BTR Cam, Long Tubes, 3" Catback, UDP, CAI Intake, Air Scoop, 3.91 Gears, Poly Diff Bushings, Toe Arms, Poly Subframe, Poly Radius-Rod bushings, ZL1 Suede Shifter, ZL1 Mounts, Arun Tuned - 475rwhp 443rwtq 11.97 @ 116 w/ 1.85 60' Listen To Song Of My People! |
| Thu Jan 01, 2009 9:19 pm |
|
|
|
|
|
Page 1 of 1 |
[ 6 posts ] |
|
All times are UTC - 5 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 4 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |