CCFBG
http://www.ccfbg.com/forum/

RHS Single plain EFI intake
http://www.ccfbg.com/forum/viewtopic.php?f=13&t=15516
Page 1 of 1

Author:  Hawk [ Sun Jan 25, 2015 12:14 pm ]
Post subject:  RHS Single plain EFI intake

http://www.racingheadservice.com/rhs/sm ... -railshtml

Anyone try this intake yet? I have been thinking about giving it a go

Author:  flame [ Sun Jan 25, 2015 1:25 pm ]
Post subject:  Re: RHS Single plain EFI intake

Sounds like a nice piece but pricey. Still have to buy injectors, throttle body, various sensors, fuel pump and a fuel managment system to run it. What would the total cost be to go efi vs carb?

Author:  Hawk [ Sun Jan 25, 2015 2:31 pm ]
Post subject:  Re: RHS Single plain EFI intake

The car already has a 92 TPI set-up so would need the TB, looking at this Tb

http://www.summitracing.com/parts/acc-74202s3

Author:  flame [ Sun Jan 25, 2015 2:51 pm ]
Post subject:  Re: RHS Single plain EFI intake

So youd run the stock ecm then?

Author:  Hawk [ Sun Jan 25, 2015 3:11 pm ]
Post subject:  Re: RHS Single plain EFI intake

To get it up and running, then, considering switching it to the EBL Flash 4

http://www.dynamicefi.com/EBL_P4_Flash.php

A lot of peeps are switching over the the Single plain intakes over on 3rdgen and swearing by them, I don't really like the Edelbrocks so was thinking of trying this one

Author:  turbosbc [ Sun Feb 08, 2015 11:23 am ]
Post subject:  Re: RHS Single plain EFI intake

Hawk wrote:
To get it up and running, then, considering switching it to the EBL Flash 4

http://www.dynamicefi.com/EBL_P4_Flash.php

A lot of peeps are switching over the the Single plain intakes over on 3rdgen and swearing by them, I don't really like the Edelbrocks so was thinking of trying this one


I have a friend who tried that same intake on 434 sbc with afr 235 heads....and 80mm turbo...car made 1k to the wheels with bs3 ecm.
intake has lots meat to be opened up quite bit....but you can never go wrong hsr style intake for tpi set up.
apereantly the procomp hsr(Chinese)
has more meat than the actual holley hsr.
I have the holley hsr and I ported it to 1206 felpro gasket..with old tfs twisted wedge head I made 423whp with the ebl flash p4.

Author:  Hawk [ Sun Feb 08, 2015 11:35 am ]
Post subject:  Re: RHS Single plain EFI intake

Ya I ran the HSR on the old set-up, it worked good, no major complaints, I want something different this time around :D

Thanx for the input on the RHS intake, I am planning to order it and give it a try once the dollar gets a little closer, lol

Author:  Hawk [ Sun Feb 08, 2015 2:19 pm ]
Post subject:  Re: RHS Single plain EFI intake

I forgot to ask, how r u liking that EBL Flash 4?

Author:  turbosbc [ Tue May 05, 2015 8:04 pm ]
Post subject:  Re: RHS Single plain EFI intake

Hawk wrote:
I forgot to ask, how r u liking that EBL Flash 4?



sorry for the late response been working hard and trying to get the race car ready for end of may...the ebl p4 its awesome..its pretty versatile and the new update has some awesome new features...hands down the best for stock ecm.
im getting another ebl for my tbi 90 1500 ck which needs a tune..lol

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/