steel wool, elbow grease, some heavy duty elbow grease and some sealer!!!
the wool comes in different grades like sand paper
| CCFBG http://www.ccfbg.com/forum/ |
|
| Best way to clean Aluminium parts? http://www.ccfbg.com/forum/viewtopic.php?f=33&t=14072 |
Page 1 of 1 |
| Author: | The Project [ Sun Sep 30, 2012 8:54 am ] |
| Post subject: | Best way to clean Aluminium parts? |
Need some help/advise for cleaning my fuel rails and maybe plenum and runners. Anyone have suggestions....Windex? Mothers Mag cleaner? Since the parts are off the car might as well give them a good clean. Thanks |
|
| Author: | juice [ Sun Sep 30, 2012 9:57 am ] |
| Post subject: | Re: Best way to clean Aluminium parts? |
steel wool, elbow grease, some heavy duty elbow grease and some sealer!!! the wool comes in different grades like sand paper
|
|
| Author: | Kevs87TA [ Tue Oct 09, 2012 9:14 pm ] |
| Post subject: | Re: Best way to clean Aluminium parts? |
Or whiles it's out, polish them, if you have access to an air compressor and some high speed buffing wheels and tons of patience...   
|
|
| Author: | Knightrider5000 [ Tue Oct 09, 2012 10:30 pm ] |
| Post subject: | Re: Best way to clean Aluminium parts? |
That's a work of art! Nicely done.... |
|
| Author: | rustine [ Fri May 11, 2018 2:34 am ] |
| Post subject: | Re: Best way to clean Aluminium parts? |
If there's white oxidation, you can use Flitz Industrial Strength Pre-Clean. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|