so here is my 96 v6 firebird as it currently sits it has a blown head gasket. i have half the motor apart and i am still working on it, my short term goal is to slightly mod the v6 so i can drive it it while i collect parts for my ls7 4l80e swap. i currently have a fair bit of work done to the car.
lower control arms
adjustable torque arm
adjustable pan hard bar
larger sway bars
wilwood 4 piston rear brake conversion
edelbrock 3" cat back
pacesetter headers
eibock lowering springs

still looking to add
wilwood 6 piston front brake kit
bmr ls k member
bmr upper and lower control arms
sub frame connectors
torque arm relocation mount
strut tie brace
qa1 coil overs
ls7
4l80e

for my exterior im looking to add
a ram air hood
trans am high rise spoiler.

Very Nice...looking forward to seeing around the streets next summer.

I like your LS swap plans !

Looks good .

Thanks. I was looking at a 6 speed swap but after looking over some of the wiring diagrams I decided to stick with the automatic

Howdy, cool car, if you get all them parts on there that thing is going to be NO JOKE! Cant wait

Painted my upper and lower intake. Used two coats of high temp black then two coats of automotive paint I'll post picture from my house on Saturday

Ok so here's the plan for the V6 port and polish the heads, bore the block, install cam, replace oil pump, timing chain, paint the block and heads black, paint the valve covers. Tune the computer( anyone know a shop to tune a 3.8 )

painted intake

Looks good

Nice colour!

Update time. I have my heads off and are in the hands of the fine people of rudy helds out of newhamburgh getting a valve job and new springs. Going to pull the harmonic balancer within the next few weeks so I can do my timing chain, oil pump and install my cam. Then it's reassembly time. Once all of that is complete it's time for a well deserved wash and wax. Once my heads come in the push is on to get it back on the road