Author |
Message |
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
Well after putting 4000 glorious km's on her in my first summer with the car, Nov 1 it was officially parked for the winter. Decided to put it up on the hoist and give it a once over to see if anything needs attention over the winter.....all seems well! received_10156416584460556 by Shane Hewitt, on Flickr Soooo.......with no real maintenance stuff that needs to be attended to........it's time! 20151102_120659 by Shane Hewitt, on Flickr
Last edited by auto_god on Fri Jul 21, 2017 9:27 am, edited 1 time in total.
|
Mon Nov 02, 2015 1:26 pm |
|
|
chevypower91
Forum User
Joined: Fri Apr 15, 2005 10:29 am Posts: 78 Location: Milton
|
Re: Back in a Formula Again
auto_god wrote: Well after putting 4000 glorious km's on her in my first summer with the car, Nov 1 it was officially parked for the winter. Decided to put it up on the hoist and give it a once over to see if anything needs attention over the winter.....all seems well! Soooo.......with no real maintenance stuff that needs to be attended to........it's time! I have been following your thread and you have done an excellent job bringing this old girl back to life. I was wondering if you can document the cam swap as I was always curious on what was involved in getting that done. Thanks Benny
|
Mon Nov 02, 2015 2:25 pm |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
I have been following your thread and you have done an excellent job bringing this old girl back to life. I was wondering if you can document the cam swap as I was always curious on what was involved in getting that done.
Thanks
Benny
No problem.
Its going to take me quite a bit longer to do as I plan on cleaning. degreasing, refinishing stuff as I go along too (that's why I elected to do this as a winter project rather than just go at it for a weekend), but I'll certainly keep the updates coming.
|
Mon Nov 02, 2015 3:24 pm |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
Got a start on my cam swap project today! received_10156437503815556 by Shane Hewitt, on Flickr After removing the air intake, serpentine belt, both rad fans, the rad & water pump, I did some degreasing & cleaning. I was pleased to find no rust in the rad cradle! received_10156437589835556 by Shane Hewitt, on Flickr That's all the energy I had .....battling a wicked cold. Put my tools away and had a nap!
Last edited by auto_god on Fri Jul 21, 2017 9:29 am, edited 1 time in total.
|
Mon Nov 09, 2015 8:24 pm |
|
|
Corp Z
Forum Moderator
Joined: Thu Feb 23, 2006 7:22 pm Posts: 330 Location: Ubique
|
Re: Back in a Formula Again
This thread continues to deliver. Keep the updates coming.
_________________1996 Camaro Z28 2010 Camaro 2SS 1994 Corvette Z07
|
Wed Nov 11, 2015 3:20 pm |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
Felt pretty good yesterday so spent a few hours plugging away. First issue I knew I was going to have to deal with was the plugs. The factory ACDelco's that were in it are too long to get a socket on #5 & #6 with the new headers on.......so they weren't coming out in one piece. received_10156455381655556 by Shane Hewitt, on Flickr A set of Accel shorty plugs are on my shopping list when I order everything I need to start putting it back together. That should solve that problem. After that minor annoyance I made pretty good progress. received_10156455644580556 by Shane Hewitt, on Flickr Plugs & wires out, distributor out, intake manifold off (again), valve covers off.......wound up with a pretty good pile of parts when I decided to call it a day! Assuming everything goes as smoothly as it has so far, another hour or two should have the OE cam out.......then time to order some parts!!!
Last edited by auto_god on Fri Jul 21, 2017 9:32 am, edited 1 time in total.
|
Mon Nov 16, 2015 10:24 am |
|
|
6speedIROC
Senior Forum User
Joined: Mon Feb 01, 2010 12:26 pm Posts: 220 Location: Ottawa
|
Re: Back in a Formula Again
I'd look around for accel shorty alternatives as they are expensive. I think autolites are the same length and cost about $2 each..
_________________86 IROC LQ4/T56/3.50 8.8 (next step..TC76) Build thread: http://ls1tech.com/forums/conversions-hybrids/1819001-1986-iroc-turbo-lq4-t56-build-ac.htmlFormerly 95 LT1 [LE2.2]/T56/4.11 9 Bolt..12.6@114MPH
|
Mon Nov 16, 2015 10:47 am |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
I'm open to suggestions. ....part number?
For what it's worth the Accel's were $29 for 8 on Summit where I'm ordering a bunch of stuff from and also have a 20% off discount code....
|
Mon Nov 16, 2015 10:57 am |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
Had a few free hours today so I went back at it. Removed the crank pulley, pulled the harmonic balancer, pulled the timing cover & timing chain & gears. Off with the rocker arms, pushrods, spider & dogbones, then out with the lifters. Then I had my "Oh shit!" moment. While taking out the bolts for he cam retainer plate, I dropped one & was positive it dropped into the oil pan! Noooooo!!!! Luckily after fishing around with a magnet, out it came.....Thank God! After twisting the AC condensor up out of the way.....out it came! received_10156458456290556 by Shane Hewitt, on Flickr Now its time to sit down & order some parts & put it all back together again!
Last edited by auto_god on Fri Jul 21, 2017 9:33 am, edited 1 time in total.
|
Mon Nov 16, 2015 9:18 pm |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
Removing double post.
Last edited by auto_god on Sat Dec 26, 2015 8:50 am, edited 1 time in total.
|
Mon Nov 16, 2015 9:28 pm |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
Well, cam is in. Lifters, pushrods, dog bones & spider are all in place as is the rad......now I'm at a standstill waiting for parts. While I'm waiting on parts, its time to put some time in on some of the parts that will be going back on. The timing cover is the first one to get dealt with......its not going back on the car looking like this! received_10156464611400556 by Shane Hewitt, on Flickr It would be easy enough to throw it in the sandblast cabinet, but I'm paranoid about bits of that sand finding its way into the motor no matter how well I clean it, so out came the electrolysis tank again! received_10156464632025556 by Shane Hewitt, on Flickr After a few hours things are looking much better! Think I'll leave it in overnight to clean it up real nice. received_10156467479905556 by Shane Hewitt, on Flickr
Last edited by auto_god on Tue Aug 01, 2017 8:18 am, edited 2 times in total.
|
Thu Nov 19, 2015 7:48 pm |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
After cooking for 24 hrs I pulled the cover out. 20151120_161351 by Shane Hewitt, on Flickr Cleaned up well! A quick shot of paint & its completely different with a net cost of $0, and a total of about 10 mins of my time all totaled up. received_10156470012905556 by Shane Hewitt, on Flickr Crank pulley is undergoing the same treatment currently.
Last edited by auto_god on Fri Jul 21, 2017 9:36 am, edited 1 time in total.
|
Sat Nov 21, 2015 10:00 pm |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
Same results for the crank pulley! B efore received_10156470575845556 by Shane Hewitt, on Flickr After received_10156475188870556 by Shane Hewitt, on Flickr Balancer is cooking currently!
Last edited by auto_god on Fri Jul 21, 2017 9:38 am, edited 1 time in total.
|
Sun Nov 22, 2015 3:37 pm |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
Balancer & waterpump now ready to go back on too! received_10156484948630556 by Shane Hewitt, on Flickr received_10156479322035556 by Shane Hewitt, on Flickr Apparently my parts order has shipped, so hopefully I can start making some progress putting her back together this week!
Last edited by auto_god on Fri Jul 21, 2017 9:39 am, edited 1 time in total.
|
Sun Nov 29, 2015 9:41 am |
|
|
auto_god
Senior Forum User
Joined: Wed Sep 03, 2014 8:59 pm Posts: 303 Location: Barrie
|
Re: Back in a Formula Again
So this little gem of a tool from Trick Flow has solved my spark plug dilemma. The OE, standard length spark plugs that I have plenty of are easily installed and removed now! Well worth the $15!! received_10156507022690556 by Shane Hewitt, on Flickr
Last edited by auto_god on Fri Jul 21, 2017 9:40 am, edited 1 time in total.
|
Fri Dec 04, 2015 7:09 pm |
|
|
|
Who is online |
Users browsing this forum: No registered users and 11 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|