Author |
Message |
colin911
Senior Forum User
Joined: Tue Mar 22, 2005 8:17 pm Posts: 799 Location: St Catharines, ON
|
Re: issue with brakes..
Would these be the hoses in question? http://www.autozone.com/autozone/parts/ ... 6223_2362_http://www.autozone.com/autozone/parts/ ... 6223_5913_Also, both comments say "May require hose lock replacement". What is that referring to?
_________________'85 Camaro Z28 350 5 speed - Sold
|
Fri Sep 23, 2011 7:38 pm |
|
|
Z28 MeTaL HeAd
CCFBG Club Member
Joined: Tue Feb 28, 2006 1:42 pm Posts: 2739 Location: Mississauga
|
Re: issue with brakes..
The hose lock's are the slider style retainer clips that hold/secure the ends of the flex lines to the car.
_________________2012 Camaro 2SS/RS - LS3/TR6060: BTR Cam, Long Tubes, 3" Catback, UDP, CAI Intake, Air Scoop, 3.91 Gears, Poly Diff Bushings, Toe Arms, Poly Subframe, Poly Radius-Rod bushings, ZL1 Suede Shifter, ZL1 Mounts, Arun Tuned - 475rwhp 443rwtq 11.97 @ 116 w/ 1.85 60'Listen To Song Of My People!
|
Fri Sep 23, 2011 10:04 pm |
|
|
colin911
Senior Forum User
Joined: Tue Mar 22, 2005 8:17 pm Posts: 799 Location: St Catharines, ON
|
Re: issue with brakes..
Camaro_87 wrote: Not the russel kit no. But similar. 65 bux for 3 braided lines from a company. That deals with the gm dealer my dad works at. Ok dumb question, why are there 3 lines? Don't you just need one hose per side?
_________________'85 Camaro Z28 350 5 speed - Sold
|
Wed Sep 28, 2011 1:24 pm |
|
|
6SIX6
CCFBG Club Member
Joined: Thu Jul 05, 2007 5:32 am Posts: 1508 Location: Miserysauga , Ontario
|
Re: issue with brakes..
I have those hoses in my garage if you need them still. One is new the other was only on the car for abit.
_________________My FQuickMy GarageTHE MISSISSAUGA CHAPTER
|
Wed Sep 28, 2011 2:13 pm |
|
|
mikesz1984
Forum Moderator
Joined: Fri Mar 18, 2005 6:54 am Posts: 1840 Location: ingersoll
|
Re: issue with brakes..
colin911 wrote: Camaro_87 wrote: Not the russel kit no. But similar. 65 bux for 3 braided lines from a company. That deals with the gm dealer my dad works at. Ok dumb question, why are there 3 lines? Don't you just need one hose per side? there is one for the rear axle, it goes from the hard line on the car to the hard line on the rear end
_________________ 355, trickflow heads, comp cams roller cam, compcams rollertip rockers. First fuel injection, t56, hooker headers, dynomax exhaust.
|
Wed Sep 28, 2011 5:52 pm |
|
|
PlayersZ28
Senior Forum User
Joined: Tue Sep 26, 2006 7:32 am Posts: 1996 Location: Wasaga Beach, ON
|
Re: issue with brakes..
mikesz1984 wrote: colin911 wrote: Camaro_87 wrote: Not the russel kit no. But similar. 65 bux for 3 braided lines from a company. That deals with the gm dealer my dad works at. Ok dumb question, why are there 3 lines? Don't you just need one hose per side? there is one for the rear axle, it goes from the hard line on the car to the hard line on the rear end Right, drum rear has 3 flex lines. One for each front caliper and one for the drop from the body to the axle. Disc rear adds 2 more, one for each rear caliper.
_________________ 2017 Chev 3500HD CC SB 1981 Chev Z28 2011 F350 CC DRW (traded) 2004 Corvette vert (sold) 2007 Chev Avalanche, 6" lift (gone) 1970 Firebird project (sold)
|
Wed Sep 28, 2011 6:02 pm |
|
|
colin911
Senior Forum User
Joined: Tue Mar 22, 2005 8:17 pm Posts: 799 Location: St Catharines, ON
|
Re: issue with brakes..
Ok, thanks guys. I have the same issue with the car diving to the left on braking. Just picked up the two front hoses for $20.
_________________'85 Camaro Z28 350 5 speed - Sold
|
Thu Sep 29, 2011 11:17 am |
|
|
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|