|
Page 1 of 1
|
[ 10 posts ] |
|
Quality exhaust work in Scarborough
Author |
Message |
Kensredzed
CCFBG Club Member
Joined: Mon Apr 21, 2014 1:17 pm Posts: 143 Location: Scarborough
|
Quality exhaust work in Scarborough
Greetings everyone,
My exhaust was hanging a bit low after hitting a few extreme pot holes. The clamps must not have been tight enough after removing the muffler and re-installing it after changing a fuel pump several months ago.
I took my car to Thruway Muffler at 2583 Eglinton Ave. I asked them to see if they could re-adjust the system and tighten the clamps? They said the "right way" to do the job was th re-hang the system at the back, remove the clamp and weld in a small exention to replace the clamp. Before they start the job I ask the muffler technician if he's aware that the car has a stainless steel exhaust from front to back and he says "I know it does, it's not problem. I will fix it right".
Who am I to argue with the "right way" to do things?
I get home and find out that they welded a mild steel patch into a stainless steel exhaust system. When I went back to Thruway, the excuses were "We don't stock stainless steel pipe" and "We're a universal muffler repair shop and don't work with stainless". I asked both the manager and the technician if they owned a car like mine with a complete stainless exhaust, would they weld in a stainless or mild steel patch? Neither had anything intelligent to say. They could have ordered the pipe.
They offered to re-weld the patch if I bring them the stainless steel pipe. Another problem is the technician left the center pipe way to low and it bottems out on just about everything. I was promised the exhaust system would be hung correctly. Sorry buy I can't trust anything they say after this last experience.
Can anyone recommend a good exhaust place in Scarborough that can do things right? Not asking for cheap. I'm asking for good quality workmanship please?
Thanks in advance, Ken
|
Thu Aug 28, 2014 1:51 pm |
|
|
lb9 GTA
CCFBG Club Member
Joined: Fri Apr 11, 2008 9:57 pm Posts: 823 Location: scarborough/markham
|
Re: Quality exhaust work in Scarborough
I went to GT Custom exhaust in Pickering. Not Scarborough but they do good work and I know they stock stainless.
_________________ 1988 Trans Am GTA, LB9, 700R4, CAI, cat back, SFCs, Pro Kit springs, wonderbar, LCRBs
|
Thu Aug 28, 2014 9:28 pm |
|
|
Kensredzed
CCFBG Club Member
Joined: Mon Apr 21, 2014 1:17 pm Posts: 143 Location: Scarborough
|
Re: Quality exhaust work in Scarborough
Thanks lb9 GTA
_________________ 1996 Z-28/SS
Previously - 1996 Z-28, 1989 Pontiac GTA, 1985 5.7 IROC Z-28, 1976 Camaro LT, 1974 Trans Am 455HO, 1974 Z-28, 1967 Firebird Sprint, 1967 Camaro 230 cu-in 140-hp "Blue Flame" straight six with a 2-speed powerglide.
|
Thu Aug 28, 2014 11:18 pm |
|
|
Pomp
Newbie
Joined: Mon Mar 16, 2009 7:23 pm Posts: 3
|
Re: Quality exhaust work in Scarborough
Go to Noyz Boyz in Scarborough. They do custom exhaust and are great to deal with.
|
Fri Aug 29, 2014 10:27 am |
|
|
Kensredzed
CCFBG Club Member
Joined: Mon Apr 21, 2014 1:17 pm Posts: 143 Location: Scarborough
|
Re: Quality exhaust work in Scarborough
Thanks Pomp.
You joined in 2009 and this question brought out your first post? You must do a lot of reading and very little talking.
I feel privileged.
What are you driving Pomp?
Thanks again, Ken
_________________ 1996 Z-28/SS
Previously - 1996 Z-28, 1989 Pontiac GTA, 1985 5.7 IROC Z-28, 1976 Camaro LT, 1974 Trans Am 455HO, 1974 Z-28, 1967 Firebird Sprint, 1967 Camaro 230 cu-in 140-hp "Blue Flame" straight six with a 2-speed powerglide.
|
Fri Aug 29, 2014 12:03 pm |
|
|
Pomp
Newbie
Joined: Mon Mar 16, 2009 7:23 pm Posts: 3
|
Re: Quality exhaust work in Scarborough
I drive a 98 T/A WS6 that is red orange metallic. Runs 11.8's all day long.
|
Fri Aug 29, 2014 1:37 pm |
|
|
Kensredzed
CCFBG Club Member
Joined: Mon Apr 21, 2014 1:17 pm Posts: 143 Location: Scarborough
|
Re: Quality exhaust work in Scarborough
Nice ride! Nice colour too.
11.8 is fast. Open headers?
Cheers, Ken
_________________ 1996 Z-28/SS
Previously - 1996 Z-28, 1989 Pontiac GTA, 1985 5.7 IROC Z-28, 1976 Camaro LT, 1974 Trans Am 455HO, 1974 Z-28, 1967 Firebird Sprint, 1967 Camaro 230 cu-in 140-hp "Blue Flame" straight six with a 2-speed powerglide.
|
Fri Aug 29, 2014 6:59 pm |
|
|
Pomp
Newbie
Joined: Mon Mar 16, 2009 7:23 pm Posts: 3
|
Re: Quality exhaust work in Scarborough
It does so with complete exhaust including cats. It passes the E-test with flying colors.
|
Sun Aug 31, 2014 12:49 pm |
|
|
Kensredzed
CCFBG Club Member
Joined: Mon Apr 21, 2014 1:17 pm Posts: 143 Location: Scarborough
|
Re: Quality exhaust work in Scarborough
My car is at Noyz Boyz. They are 5 minutes from my home.
They are on the ball. The exhaust leak that everyone else said I had, was actually a loose spark plug.
They are removing the mild steel patch and replacing it with stainless as well as re-hanging the exhaust closer to the chassis.
I'm also having new spark plugs installed.
The car is supposed to be ready later today. Report at 6:00. News and weather at 11:00.
Thanks, Ken
_________________ 1996 Z-28/SS
Previously - 1996 Z-28, 1989 Pontiac GTA, 1985 5.7 IROC Z-28, 1976 Camaro LT, 1974 Trans Am 455HO, 1974 Z-28, 1967 Firebird Sprint, 1967 Camaro 230 cu-in 140-hp "Blue Flame" straight six with a 2-speed powerglide.
|
Thu Sep 11, 2014 10:50 am |
|
|
Kensredzed
CCFBG Club Member
Joined: Mon Apr 21, 2014 1:17 pm Posts: 143 Location: Scarborough
|
Re: Quality exhaust work in Scarborough
Noyz Boyz did a good quality job and the price was more than fair.
Some said the miss was a lifter noise. Others said an exhaust leak. Jameel at Noyz Boyz found a loose spark plug within 5-minutes of examining the car. They installed new spark plugs and car has never run smoother.
They have earned a repeat customer today.
Cheers, Ken
_________________ 1996 Z-28/SS
Previously - 1996 Z-28, 1989 Pontiac GTA, 1985 5.7 IROC Z-28, 1976 Camaro LT, 1974 Trans Am 455HO, 1974 Z-28, 1967 Firebird Sprint, 1967 Camaro 230 cu-in 140-hp "Blue Flame" straight six with a 2-speed powerglide.
|
Thu Sep 11, 2014 9:21 pm |
|
|
|
|
Page 1 of 1
|
[ 10 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 14 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|