View unanswered posts | View active topics It is currently Fri Mar 29, 2024 2:02 am



Reply to topic  [ 6 posts ] 
 attn: efh, bastard engine guys 
Author Message
CCFBG Club Member

Joined: Sat Mar 19, 2005 8:15 am
Posts: 3233
Location: Mississauga
Reply with quote
Post attn: efh, bastard engine guys
Is this a good deal?

http://buffalo.craigslist.org/pts/1896330046.html

The slugs will have to be changed though for a more street friendly 12:1 :D and heads will be more street friendly around 320 cc intake runners(119 comb chambers if it makes a diff.)

It might be too much bottom but its easy enough to use the bottle to make it worth it..

whaddya think?


Fri Aug 13, 2010 10:06 pm
Profile
Senior Forum User
User avatar

Joined: Sun Jun 05, 2005 10:36 am
Posts: 616
Location: Brampton
Reply with quote
Post 
Those heads for $2,800 might be worth it, depending on how much work and who did the work on them. My B1's cost me a whole bunch more than that.


Sat Aug 14, 2010 1:02 pm
Profile WWW
CCFBG Club Member

Joined: Sat Mar 19, 2005 8:15 am
Posts: 3233
Location: Mississauga
Reply with quote
Post 
the heads are too big..


Sat Aug 14, 2010 1:53 pm
Profile
CCFBG Club Member
User avatar

Joined: Sat Mar 19, 2005 8:07 pm
Posts: 4327
Location: The big town
Reply with quote
Post 
your not going to get a big block to run happy on todays gas at 12:1
i wouldn't go much over 10 really on todays pump gas on one, small blocks you can get away with more with the better chambers of the heads. the block is at its final bore so if there is a mark in the cyls it would need to be sleeved, its a so so deal but your getting used block at its max bore, used rods that likely need new rod bolts and gone over, a set of pistons you can't use but might be able to sell for a bit. a dominator intake and carb that isnt real great on the street.

_________________
Image

9.06@155 mph, small block pump gas with 3.42's bird
8.14@166 mph, big block on 250 shot monza


Sat Aug 14, 2010 10:27 pm
Profile
CCFBG Club Member

Joined: Sat Mar 19, 2005 8:15 am
Posts: 3233
Location: Mississauga
Reply with quote
Post 
thanks


Sun Aug 15, 2010 5:48 am
Profile
Senior Forum User

Joined: Sun Jan 07, 2007 3:29 pm
Posts: 633
Location: Guelph
Reply with quote
Post 
Mr Bastard wrote:
your not going to get a big block to run happy on todays gas at 12:1
i wouldn't go much over 10 really on todays pump gas on one, small blocks you can get away with more with the better chambers of the heads. the block is at its final bore so if there is a mark in the cyls it would need to be sleeved, its a so so deal but your getting used block at its max bore, used rods that likely need new rod bolts and gone over, a set of pistons you can't use but might be able to sell for a bit. a dominator intake and carb that isnt real great on the street.


What he said , this is what happens when you take part of a weekend off ,you miss everything :wink:


Sun Aug 15, 2010 10:49 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.